Bambu PLA Marble
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
Bambu Lab PLA Marble brings the beauty of natural stone to the world of 3D printing. The integration of inorganic particles gives it a vibrant, stone-like texture reminiscent of marble, granite or brick.
► The filament is supplied on a Basic Reusable Spool.
Note! Printing with a 0.2 mm diameter nozzle is not recommended!
Tip: All print parameters are embedded in RFID and are read automatically by the AMS.
Bambu PLA Marble mimics the appearance of natural stone.
With inorganic particles in its composition, it offers a vivid stone-like texture that resembles marble, granite, or bricks. It adds a touch of nature to your prints and provides a stunning finish for your projects.
PLA Marble Hex Code Table
| Color | Hex Code | Display |
| White Marble | #F7F3F0 | |
| Red Granite | #AD4E38 |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.22 g/cm³ |
| Vicat Softening Temperature | 57 °C |
| Heat Deflection Temperature | 56 °C |
| Melting Temperature | 156 °C |
| Melt Index | 32.2 ± 4.5 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 33 ± 4 MPa |
| Breaking Elongation Rate | 6.7 ± 0.5 % |
| Bending Modulus | 2920 ± 180 MPa |
| Bending Strength | 75 ± 5 MPa |
| Impact Strength | 24.0 ± 2.5 kJ/m² |
