- Bambu PETG Basic is prone to string, oozing or sticking to nozzle when it gets wet. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on Bambu Lab Wiki.
- Check Transparent PETG printing tips on Bambu Lab Wiki for recommended settings.
- To get shinier looks, set lower speeds and relatively higher temperatures.
- All printing parameters are embedded in RFID, which can be read through Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.
Bambu Lab PETG Basic 3D Printer Filament
Bambu Lab PETG Basic 3D Print Filament is known for impact and water resistance, high flexibility, strong layer adhesion, Bambu PETG Basic is ideal for printing tools (vises, tensioners, bag clips), toys (frisbees, boomerangs), water containers (bottles, watering cans), and outdoor items (planter pots, bottle cages) that require long-term exposure and withstanding impacts.
Product Features
- Less oozing, Stringing and Clumping
- Exceptional Light Transmittance
- Water & Impact Resistance
- Long-lasting Durability
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- Recommended to dry out before use
- AMS Compatible
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 65 °C，8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 240 - 270 °C |
| Bed Temperature (with Glue) | 65 - 75 °C |
| Printing Speed | < 200 mm/s |
| Physical Properties | |
| Density | 1.25 g/cm³ |
| Vicar Softening Temperature | 78 °C |
| Heat Deflection Temperature | 69 °C |
| Melting Temperature | 225 °C |
| Melt Index | 18.6 ± 2.2 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 48 ± 5 MPa |
| Breaking Elongation Rate | 11.2 ± 0.8 % |
| Bending Modulus | 1790 ± 120 MPa |
| Bending Strength | 81 ± 4 MPa |
| Impact Strength | 52.7 ± 2.4 kJ/m² |
