Bambu Lab P2S COMBO with AMS FDM 3D Printer Built-in camera, Up to 20000 mm/s² acceleration, Up to 16-color printing
The P2S Combo from Bambu Lab pairs the single-nozzle P2S printer with the AMS 2 Pro (Automatic Material System) to deliver multicolour / multimaterial 3D printing in one integrated bundle. The base machine (P2S) brings upgraded hardware, and the “Combo” adds the AMS unit for filament automation and colour/material switching.
Here’s a detailed breakdown of the features and specifications — I’ll also highlight what to watch out for.
Key Features:
- The P2S incorporates a new PMSM servo extruder (permanent-magnet synchronous motor) which delivers significantly more extrusion force vs its predecessor.
- Adaptive airflow cooling system: targeted cooling and better thermal management, supporting a wider range of materials including engineering filaments.
- Quick-swap nozzle system: The machine supports nozzle changes (0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm) for flexibility between fine detail and fast prints. AI / smart camera monitoring: The P2S includes a built-in camera (1080p) for live-view monitoring of prints and for detecting certain errors.
- The AMS 2 Pro system: With up to 4 filament spools in the base unit, drying capability, RFID recognition of filaments, and fast filament change for multi-colour/multi-material workflows.
- Large build volume for a single-nozzle / relatively compact machine: 256 × 256 × 256 mm for the build area.
Technical Specifications (P2S / Combo)
Here are the specs as published:
P2S Printer:
- Build volume: 256 × 256 × 256 mm.
- Dimensions: approx 392 × 406 × 478 mm (may vary depending on source).
- Net weight: ~14.9 kg.
- Printing technology: FDM / FFF.
- Filament diameter: 1.75 mm.
- Nozzle sizes supported: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm.
- Max nozzle temperature: 300 °C.
- Max heated bed temperature: 110 °C.
- Max print speed: up to 500 mm/s and max acceleration up to 20 000 mm/s² (as per spec sheet)
- Display: 5-inch touchscreen, 854 × 480 pixels.
- Connectivity: Dual band WiFi, USB port.
- Supported filaments: PLA, PETG, ABS, ASA, TPU, and more advanced filaments like PA, PC, CF/GF composites (depending on conditions)
AMS 2 Pro:
- Supported spool width: 50-68 mm; diameter: ~197-202 mm.
- Drying: Active moisture removal; max drying temperature around 65 °C.
- Filament switching speed improved (≈60 % faster in some marketing) over prior versions.
Bambu Lab P2S
The Icon, Redefined.
Cold-Air Cooling
PMSM Servo Extruder
AI Error Detection
Active Filament Drying
5-inch Refreshed Touchscreen
The User Experience As Good As A Smartphone for Bambu P2S
DynaSense Extruder
The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. It actively detects filament grinding and clogs in real time.
5 inch Touch Screen
The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.
AI Error Detection
The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.
Print Smooth At Every Corner, Always.
Active Flowrate Compensation
The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.
Adaptive Airflow System
Unlike traditional cooling systems that recirculate hot air, the P2S's Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed.
Heat Preservation, Carbon Filter
The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping.
High Quality Mechanism For Reliable Printing.
Quick Swap Hotend
The P2S features a quick-swap hotend design with a simple one-clip mechanism that releases the entire nozzle and heatsink assembly—no wiring disconnection required. This drastically reduces nozzle change time and eliminates the risk of wiring errors.
1080P High-Rate Camera
Enhanced LED lighting dramatically improves the clarity of your liveview video and timelapses. Paired with a high-frame-rate camera & Dual-band Wi-Fi, you can comfortably monitor your printer remotely and capture beautifully illuminated timelapses perfect for sharing on social media.
Hardened Steel Nozzle & Extruder Gear
P2S's extrusion system and nozzle are crafted from hardened steel, offering exceptional durability and wear resistance. Designed specifically for stable, long-term printing of high-performance fiber-reinforced materials.
High Quality Mechanism For Reliable Printing.
Built-in 2-in-1 Buffer
Built-in 2-in-1 Buffer (equipped with AMS combo), effortlessly switch between your AMS and external filament spools for maximum flexibility.
Flat Base Plate
The smooth, flat surface makes it simple to swipe out all residue, keeping your printer clean.
Shatter-Safe Front Glass
Engineered for safety, the front glass is protected by a film built in case of shattering, protecting you and your workspace.
Multi-Color Printing & Filament Drying, All in One Box.
Electro-Magnetic Air Vent
Automated venting facilitates dehumidification during drying and airtight sealing for weeks of quality printing.
Auto-Rotate Drying
During the drying process, the filament spools rotate automatically to provide more even drying.
RFID Sync
AMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed.
Specifications
