Bambu Lab H2C
Uncompromising Multi-Material.
1- Purge Saving Multi-Color Printing
Painting intricate models is a thing of the past — the H2C brings your designs to life with six-color printing and a versatile seventh nozzle for support or an additional color. This whole thing is printed in 2 parts. The main raptor is 6-color and the base is another 6-color.
2- Real-Time Error Detection.
The PMSM servo extruder delivers up to 10 kg of maximum extrusion force—70% more than stepper motor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.
3- 50 µm Ultra-Fine Motion Accuracy*
With its Vision Encoder, the H2C achieves a distance-independent motion accuracy of less than 50 μm—thinner than human hair. The system automatically compensates for any mechanical drift during calibration, ensuring consistent precision and peak performance over time.
4- Smooth Surface, Sharp Edges
The H2C leverages both the servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to sense extrusion dynamics. This enables precise extrusion control and automatic calibration of Pressure Advance (PA) parameters for each filament, resulting in smoother surfaces and cleaner, sharper edges.
5-Comprehensive Print Monitoring
The H2C is equipped with an array of 59 sensors* and a quad-camera computer vision system, all orchestrated by our proprietary neural algorithm. During printing, this system delivers intelligent, real-time diagnostics that can detect even the most subtle print anomalies as they happen. You don't have to be an expert to solve problems—your printer does the job for you.
Bambu Lab H2C
Unleash The Full Potential of High-Performance Materials
Purge Free Multi Color Printing
Minimal Purge Waste
In traditional single-nozzle multi-material printing. purging is needed to clear leftover material between filament changes. Vortek changes that with an intelligent hotend-swapping system that replaces the entire hotend-delivering faster, cleaner prints with minimal waste.
Delivering the Most Efficient Combination
The Vortek system can store filament information in the hotend's memory, ensuring the correct filament is matched to each hotend. If you are printing with more than seven filament types, the system can calculate the optimal combination to minimize purge waste.
Fully Automatic Filament Change
The Vortek system works seamlessly with our highly reliable AMS (Automatic Material System), making the entire filament change process fully automatic-no need to manually load each filament into the toolhead.
Vortek Hotend Change - Key Highlights
Small Form Factor, More Filaments
Because only the hotend is swapped, the system can house up to six replaceable hotends without significantly reducing the build volume. That means more materials, more colors, and more possibilities - all in one print.
Contactless Design For Reliability
Our high standards for reliability led us to move away from contact-based metal pins, which are prone to oxidation and unstable connections.We developed a contactless solution that ensures a stable, high-frequency connection the foundation for precise temperature control and intelligent hotend sync.
8-Second Induction Heating
Our industry-leading induction heating technology brings the nozzle to temperature in 8-sec, significantly reducing the preheating time for each material swap compared to traditional methods.
Unlimited Colors
Unlike traditional toolchanger printers that limit color count by the number of toolheads, the H2C supports up to 24 materials in a single print through parallel-connected AMS units.
Fully Automatic Nozzle Offset Calibration
Our Inductive nozzle offset calibration is fully automated-no manual steps, no calibration plates, no extra setup. In just a few minutes, the H2C precisely callbrates nozzle offset to within 25 microns.
Enclosed for High-Performance Printing
With its seamless enclosure and adaptive airflow system, the H2C maintains a stable chamber temperature for high-performance materials and filters the air to keep your workspace clean and safe.
A Serious Production Powerhouse
Top Tier Printing Performance
The PMSM servo extruder delivers up to 10 kg of maximum extrusion force—70% more than stepper motor dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.
Smooth Surface, Sharp Edges
The H2C leverages both the servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to sense extrusion dynamics. This enables precise extrusion control and automatic calibration of Pressure Advance (PA) parameters for each filament.
Get Full Potential of High End Materials
The H2C's 65 °C actively heated chamber & 350°C Nozzles minimizes warping and deformation while enhancing layer adhesion for high-performance, high-temperature filaments.
Safety & Security Checked!
Comprehensive Print Monitoring
The H2C is equipped with an array of 59 sensors* and a quad-camera computer vision system, all orchestrated by our proprietary neural algorithm. During printing, this system delivers intelligent, real-time diagnostics that can detect even the most subtle print anomalies as they happen.
Fire-Retardant Construction
The H2C's chamber is constructed entirely with flame-retardant material, providing robust, passive fire safety protection across the entire enclosure
Flexible Network Security & Connectivity
The H2C offers convenient cloud connectivity for remote control from any device. For security-sensitive applications, it also provides full offline functionality, ensuring complete physical isolation.
