Anycubic High Clear Resin

Anycubic High Clear Resin

Excellent Resist Yellowing Performance 

The models printing with ANYCUBIC High Clear resin can stay crystal and clear without yielding a yellow hue in an interior environment for a long time.

High transparency and long-lasting clarity

ANYCUBIC High Clear Resin offers the prints with a detailed and stunning surface. In order to get a polished look, it's recommended to apply coats of anycubic high clear resin or vanish on the surface of the model before curing.

Tough and Resilient

ANYCUBIC High Clear 3d resin has been optimized in terms of formula, there is a 100% rise in resilience compared to standard resin, making the prints more durable and less easy to break.

Light Odor and Less Irritation

ANYCUBIC High Clear 3d printer resin has a light odor and is less irritating, more friendly to odor sensitive individuals, bringing users a better and safer printing experience.

Wide Compatibility

ANYCUBIC High Clear Resin is compatible with all resin 3d printers in the market. To ensure outstanding clarity and transparency of the models, please refer to our recommended parameters to set the light exposure parameter.

MODEL PRINTS

Resin Parameters

Instructions for Use

(1) Before use:

Shake the liquid resin before use;

Clean the resin tank and the molding platform to keep the bottom of the resin tank in light

transmission.

(2) When using:

Unscrew the cap and add it to the resin tank according to the equipment requirements;

Select the correct print parameters and settings for printing.

(3) After use:

After printing, please use the matching tools for post-processing, including blade, diagonal

pliers,tweezers,containers,gloves;

ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;

(4) Post-processing steps:

A. Remove the printed model from the molding platform with a blade;

B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken

out and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.

C.Proper processing, such as removing support, polishing, coloring, etc.

Precautions

The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light
to avoid high temperature or sunlight.

Suggested operating temperature is 18-35'c, and a low temperature may affect the printing effect, thus, the
resin can be properly preheated before use (not more than 60°C).

If the resin pigment settles, it can be used after stirring or shaking.

In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.

To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.

To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the
light source after curing.Therefore, the following steps are recommended:
(1) The intensity of mercury lamp or LeD light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury
lamps is prohibited.
(4) lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive
material.