Vertex 3D is Exclusive Partner of Bambu Lab in Pakistan Click Here
Bambu Lab A1 Combo 3D Printer
Product Features
- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
- The upgraded heat bed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.
Why Choose Bambu Lab A1 Combo?
Full-auto Calibration
Absolutely Hassle-free
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
AMS Multi-color Printing
The Most Reliable Multi-color System
The AMS lite has been recognized as the most reliable multi-color 3D printing solution. It also features RFID-sync to automatically match the best print settings for your Bambu filaments, delivering perfect print quality without manual tuning of the filament profile.
We are the official partner of Bambu Lab to ensure availability of
Bambu Lab 3D Printer in Pakistan
Bambu Lab A1 Combo 3D Printer's Key Features
A Colorful Gateway to 3D Printing
Full-auto Calibration
Active Flow Rate Compensation
Multi Color Printing
256*256*256 mm³ Build Volume
1- Click Printing With MakerWorld
Print Like A PRO From Your Very First Use
Full-auto Calibration
Absolutely Hassle-free
Bambu Lab A1 Combo 3D Printer handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
AMS Multi-color Printing
The Most Reliable Multi-color System
The AMS lite has been recognized as the most reliable multi-color 3D printing solution. It also features RFID-sync to automatically match the best print settings for your Bambu filaments, delivering perfect print quality without manual tuning of the filament profile.
High-speed Precision
The High-speed You Can Truly Rely On
A1 is equipped with low-drag linear rails, a powerful MCU,accelerometers, a nozzle pressure sensor, and an advanced motion control system that maximizes their potential. Its high-speed performance is built on a solid foundation, ensuring consistent reliability with stable and uniform output for every print.
Intelligent Print Monitoring
Put Your Printing On Autopilot
3D printing is a complex task where many things can go wrong. The A1 is equipped with a comprehensive print status monitoring system to help keep the print job in check.
Full-size Print Volume
Generous Space for You to Expand Your Fantasy
A1 features 256mm*256mm*256mm build volume, bigger than most of the entry-level printers. Print a helmet in one go, we got you.
Connected with Privacy in Mind
Start & Control on Whatever Device You Prefer
Not only can you connect your A1 to any device you prefer through Bambu Cloud Service, but you can also do so through LAN-only mode. We offer fully customizable connection options to match your privacy preferences.
Active Flow Rate Compensation
The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy
Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise
Fully advanced features of Bambu Lab A1 Combo 3D Printer in Pakistan
Bambu Lab A1
Specifications
Item | A1 Specification | |
Body | Build Volume(W*D*H) | 256*256*256 mm³ |
Toolhead | Hot End | All-Metal |
Nozzle | Stainless Steel | |
Max Hot End Temperature | 300 °C | |
Nozzle Diameter | 0.4 mm (Included) | |
Heatbed | Build Plate | Bambu Textured PEI Plate (Included) |
Max Build Plate Temperature | 100°C | |
Speed | Max Speed of Tool Head | 500mm/s |
Max Acceleration of Tool Head | 10000mm/s² | |
Supported Filament | PLA, PETG, TPU, PVA | Ideal |
ABS, ASA, PC, PA, PET, | Not Recommended | |
Sensors | Chamber Monitoring Camera | Low Frame Rate Camera (Up to 1080P) |
Filament Run Out Sensor | Yes | |
Filament Odometry | Yes | |
Power Loss Recover | Yes | |
Filament Tangle Sensor | Yes | |
Physical Dimensions | A1 : 385*410*430 mm³ , Package size : 596*536*325 mm³ , Net weight 8.3 kg , Gross weight 13 kg |
A1 Combo Add-Ons
