Skip to Content

Bambu 3D Effect Sheet- Carbon Fiber Sheets (2 Pcs)

https://www.vertex3d.co/web/image/product.template/2106/image_1920?unique=39d1537
(0 review)

14,999.00 Rs. 14999.0 PKR 14,999.00 Rs.

14,999.00 Rs.

Not Available For Sale

  • Brand
  • Compatibility
  • SKU

This combination does not exist.

Accessories Bambu Lab
Brand: BAMBU LAB
Compatibility: X1 Series/ P1 Series/ A1
SKU: FAP017

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Carbon Fiber Surface Sheet

The Bambu Carbon Fiber sheet has a very slight texture similar to real Carbon Fiber. The pattern transfers to the first layer of the 3D printed model, creating a 3D effect with a distinctive texture, especially when used with a gray carbon filament color.

How to install the Bambu 3D Effect Sheet

                                                                                                                                                  

Note

1. The 3D Effect Sheets don't come pre-applied on the steel plate. Manual installation is required before use. You can apply the sheet on each side of the steel plate.

2. For best results, we recommend applying the Bambu 3D Effect Sheets only on the official steel plate from Bambu Lab.

3. Bambu Engineering Plate (the other side of Bambu Cool Plate/High Temp Plate) can also be used for applying the Bambu 3D Effect Sheets. If you plan to apply a 3D Effect Sheet on an existing plate, ensure that you remove the previous sheet and clean any glue residue completely, before installing the 3D Effect Sheet. Make sure the surface is dry and clean before the application.

4. Please set the Plate Type to Smooth PEI/High Temp Plate and carefully follow the Heatbed Recommended Settings when using the Bambu 3D Effect Sheets.

5. The 3D effect patterns require a clean surface to remain visible. Grease can cause the patterns to disappear. It is essential to keep the surface clean. We recommend using hot water and detergent for cleaning, and avoid touching the surface.


Considerations

1. Due to reflections, the LIDAR calibration will not work as expected when using Effect Sheets. We recommend skipping the LIDAR calibration sequence, or calibrating with a regular plate.

2. The 3D Effect Sheets are considered consumables. To prolong the lifespan of the transfer textures, try placing your print objects on different areas of the sheet.

3. Do not apply glue to the sheet surface.

4. Pay close attention when using a scraper to remove prints, to avoid damaging the sheet surface.


In the Box 

ItemQuantity
Carbon Fiber Sheets2 Pcs


Recommended Settings


1. We recommend using PLA and TPU filament for printing. Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements.Please select Smooth PEI Plate/High Temp Plate for the Plate Type in Bambu Studio.

2. For X1 Series users, please disable the Build Plate Position Detection in 'Settings ->Print Options -> Enable the detection of build plate position' when printing with the 3D Effect Sheet to avoid error reports.

FilamentsHeatbed Temperature
PLA60~65℃
TPU35~45℃


Product Specifications

MaterialsMetalColorBlack
Packaging Weight0.32 kgPackaging Size282*264*11mm (for X1 Series/P1 Series/A1)190*200*12mm (for A1 mini)